The scan module allows you to acquire all needed scans for the selected design setup. Possible design setups include single-unit CAD designed abutments and multi-unit implant-based CAD designed bridges.
Depending on the type of scanner that is set to be used with DTX Studio™ Lab (see scanner settings), the KaVo LS 3 scan module or the NobelProcera 2G scan wizard will be used.
To start the scanning procedure, on the Scan or import your model top action card of the treatment line, click either Start (if the KaVo L3 scanner or no scanner was selected to be used) or Scan or Import (if the NobelProcera 2G scanner was set).
Notes
For a scan request or an imported scan case, click Start scan in the Add case wizard.
For a case request for which scans were attached via DTX Studio™ Go, the scan data will automatically be available in the import wizard.