Case overview

In the first column, the number counts down to the due date:

Color	Symbol	Due in
Green		More than 5 days
		4 days
Orange		3 days
		2 days
Red		1 day
		0 days
		Overdue
Grey		Finished Note: Click the ellipsis icon in the upper-right corner and select Finalize case to tag a case as 'Finished'. This case will no longer show up if you filter your cases on Cases in progress.

Note

In the center pane, a more detailed countdown for the due date is shown next to the patient name.

In the second column the name of the patient is shown and underneath the name of the treating clinician.

The case status is shown in the third column. A case gets a status depending on the treatment line stage you are in:

Status	Description
Created	The case has been set up.
Scanning	The case is currently being scanned.
Scanned	Scan data are available. This is the 'finished' state for a scan case.
Designing	The case is currently open in the design or bar module.
Resume designing	For this case a design has been saved but not finished.
Designed	A finished design is available for the case.
Ordered	For this case an order has been placed. This is the 'finished' state for a restoration case.
TempShell calculated	The TempShell for a TempShell case has been calculated. This is the 'finished' state for a TempShell case.
TempShell failed	The TempShell calculation failed. Start again to recalculate the TempShell.
Ready to remake	A remake request has been started for this case.